Blogs | Nanopowder and Nanoparticles, Nanomaterial Powders - Part 17

Polytetrafluoroethylene as Excellent Binder for Li-ion Battery

seferbas Blogs 0 9 December 2022

It is Essential for lithium-ion batteries to have an appropriate binder for their electrodes. In fact, the binders must have enough durability and a long life as significant requirements to be employed for electrodes. Basically, binders need to be electrochemically stable and chemically inert in order for lithium-ion batteries to show excellent performance. Furthermore, PTFE

Graphene Quantum Dots: Properties, Synthesis & Applications

seferbas Blogs 0 9 December 2022

Graphene blocks, which are two-dimensional, transverse sized are called graphene quantum dots (GQD), exhibiting physical, chemical, and biological properties. GQD has a better prospect in the biomedical environment due to its small size (less than 100nm). Different studies showed that GQDs are less biotoxic and more biocompatible. Different methods are used for the synthesis of

Revolutionary Steps in Nanotechnology and Smartphones

seferbas Blogs 0 9 December 2022

Nanotechnology is engineering, science, and technology conducted at the nanoscale. 1 nanometer is a meter’s 10-9 or a meter’s billionth. Researchers want to make the materials at the nanoscale so they can have greater chemical reactivity, increased control of the light spectrum, lighter weight, and higher strength as compared to their larger-scale counterparts. Now, nanotechnology

Silicon-Based Wafer for Best Photovoltaics Applications

seferbas Blogs 0 9 December 2022

Silicon has predominant applications in photovoltaics as the raw material for multi-crystalline and monocrystalline wafers and thin-film silicon. Today in solar cell technology, crystalline silicon wafers are considered the most common basis for the solar cell production industry. Therefore, a lot of attention is paid to silicon as the most critical material for photovoltaics these

Uses of Nanomaterials in Bio-Inspired Soft Robotics

seferbas Blogs 0 9 December 2022

Nano-sized particles exist in nature and they can be created with a variety of materials and products, like silver or carbon. Nanomaterials are characterized by their small size and are measured in nanometers. Engineered nanomaterials (ENMs) are materials that are engineered on small scale and they have exceptional electrical, mechanical, and optical properties, which exhibit

Synthesis of Reduced Graphene Oxide

seferbas Blogs 0 9 December 2022

Graphene oxide is basically an electrically insulating material that is reduced from graphene and is considered as a highly conducting material with numerous applications in the fields of sensors, supercapacitors, nanocomposites, and nanoelectronics. There are a lot of methods to synthesize reduced graphene oxide. Graphene oxide layers contain numerous functional groups serving in the oxidization

Nanopowder and Nanoparticles, Nanomaterial Powders

seferbas Blogs 0 25 January 2021

Nano Cobalt Powder(Nano Co)

seferbas Blogs 0 24 January 2021

High-density magnetic recording material: It has the advantages of high recording density, high coercive force, high signal-to-noise ratio and good oxidation resistance, which can greatly improve the performance of magnetic tape and large-capacity hard and soft disks;

Nano Silicon Powder(Nano Si)

seferbas Blogs 0 24 January 2021

Nano silicon can be used in coatings to form into silicon nano film, which is widely used in solar energy;

Nano Aluminum Powder(Nano Al)

seferbas Blogs 0 24 January 2021

High efficiency combustion improver agent: Greatly improve the rocket solid fuel combustion efficiency and combustion speed, reduce the pressure index, improve the combustion stability.

Flake Aluminum Powder

seferbas Blogs 0 24 January 2021

Production by dry method without solution, our flake aluminum powder is more environment-friendly. Depending on the different processing technology, two different kinds of application specification :leafing and non-leafing which can be well used in water-based or oil-based coating film layer.

Nano Metal Powder

seferbas Blogs 0 24 January 2021

With the continuous improvement of the preparation of nanometer metal powder technology, nanometer metal powder is widely used in machinery, metallurgy, chemical industry and other industries, and plays an immeasurable role.

Nano Iron Powder(Nano Fe)

seferbas Blogs 0 24 January 2021

Wave-absorbing materials: High-performance millimeter wave stealth materials, visible light-infrared stealth materials, structural stealth materials and mobile phone radiation shielding materials.

Cellulose

seferbas Blogs 0 1 January 2020

Nanocellulose refers to cellulose in the nanometre scale and is a material derived from natural materials including plants and bacteria. But it can also be produced from sugars through biotechnological processes using bacteria that give the product its’ final name – bacterial nanocellulose. Production processes in the 1980’s were energy-intensive, but substantial progress has been

Cerium Dioxide

seferbas Blogs 0 1 January 2020

Cerium dioxide (CeO2) has a variety of applications. For example ceria nanoparticles are used in catalytic converters in the automotive industry to convert harmful carbon monoxide to less harmful carbon dioxide. The semi-conductor industry uses cerium dioxide nanoparticles as fine abrasive and polishing agent in the manufacturing of computer chips. Non-nanoscaled cerium dioxide can improve the light

Iron and iron oxides

seferbas Blogs 0 1 January 2020

Iron is the highest occurring metal found in the earth crust. Iron ore is the starting material to produce iron oxides which are used in various applications ranging from the production of steel to data storage devices. Currently applications of iron oxide nanoparticles in medical uses, such as contrast agents or tumour therapeutic agents, are being tested.

Fullerenes

seferbas Blogs 0 1 January 2020

Fullerenes, also called bucky balls, are a very new modification of pure carbon and their form resembles soccer balls. They consist out of 20 hexagons and 12 pentagons with a carbon atom in each of edges of this lattice structure. There are only very few applications of this new material class. How can I

Graphene

seferbas Blogs 0 1 January 2020

Graphene is a one-atom thick layer of carbon and is considered to be a new wonder molecule. Its production became possible only very recently and graphene is now available for various applications. The term graphene is often applied to many members of the family of graphene-based materials the two most important members being graphene and

Indium Tin Oxides

seferbas Blogs 0 1 January 2020

Indium tin oxide (ITO) or tin-doped indium oxide is a mixture of indium oxide and tin oxide in which the tin component can contribute up to one-fifth of the material composition. Indium tin oxide is a transparent (see-through) material with electrical conductivity. Indium tin oxide is applied mainly as a film to create transparent conductive coatings in the

Carbon Black

seferbas Blogs 0 1 January 2020

Carbon Black or carbon soot is a material with high economic importance containing pure carbon. Carbon Black is produced through specific combustion processes and the production of this material can be traced back more than one hundred years. It is used in many products including car tyres, printer toner, dyes for leather or textiles and