Alloy Micron Powder

Showing all 11 results

Show sidebar
Close

Type 316 Stainless Steel Powder, Purity: 99.9 %, Size: 325 mesh

35.00380.00
Type 316 Stainless Steel Powder Purity: 99.9 %, Size: 325 mesh Technical Properties: PURITY 99.9 % COMPOSITION Fe- 70, Cr-
Close

Nickel Chromium (Ni-Cr) Alloy Micron Powder, Size: 325 mesh, Ni-80%, Cr-20%

18.00465.00
Nickel Chromium (Ni-Cr) Alloy Micron Powder Size: 325 mesh, Ni-80%, Cr-20%
Close

Copper Tin (Cu:85-Sn:15) Alloy Micron Powder, Purity: 99.5+%, Size: 325 mesh

7.00195.00
Copper Tin (Cu-Sn) Alloy Micron Powder Purity: 99.5+%, Size: 325 mesh, Sn:15-Cu:85  
Close

Copper Tin (Bronze, Cu:80-Sn:20) Alloy Micron Powder, Purity: 99.95%, Size: 325 mesh

8.00198.00
Copper Tin (Bronze, Cu:80-Sn:20) Alloy Micron Powder Purity: 99.95%, Size: 325 mesh  
Close

Cobalt Chromium (Co-Cr) Alloy Powder, Size: < 44 µm, Co: 20%, Cr: 80%

95.00290.00
Cobalt Chromium (Co-Cr) Alloy Powder Size: < 44 µm, Co: 20%, Cr: 80%
Close

AZ91 Magnesium Alloy Powder, Purity: 99.95%, Size: 325 mesh

9.00390.00
AZ91 Magnesium Alloy Powder Purity: 99.95%, Size: 325 mesh  Magnesium Micro Powder can be used for preparation of pressed and
Close

Aluminum Zirconium Alloy Powder, Purity: 99.9+%, Size: < 44 µm, Al: 90%, Zr: 10%

90.00285.00
Aluminum Zirconium Alloy Powder Purity: 99.9+%, Size: < 44 µm, Al: 90%, Zr: 10%
Close

Aluminum 6061 Alloy Powder, Size: – 325 mesh

96.00287.00
Aluminum 6061 Alloy Powder Aluminum 6061 Alloy Powder have outstanding characteristics such as good acceptance of applied coatings, relatively high strength, good
Close

Aluminum 2024 Alloy Powder, Size: – 325 mesh

98.00295.00
Aluminum 2024 Alloy Powder Aluminum 2024 Alloy Powder is a high strength material of adequate machinability with poor corrosion resistance,
Close

Aluminum 7075 Alloy Powder, Purity: 99.5+%, Size: <325 mesh

85.00245.00
Aluminum 7075 Alloy Powder Purity: 99.5+%, Size: <325 mesh Alumina is a standout amongst the most cost effective and broadly
Close

Iron Nickel (Fe-Ni) Alloy NanopowderNanoparticles, Size 35-95 nm, FeNi28

46.00304.00
Iron Nickel (Fe-Ni) Alloy Nanopowder/Nanoparticles Size: 35-95 nm, Fe:Ni/2:8 Technical Properties: Alloy Ratio (Fe-Ni) 20-80 Average Particle Size (nm) 35-95